Keep Sightlines Open with 3 Rail Flat Top Fence Panels
Define property lines with three horizontal rails, a straight top rail and open vertical pickets. Choose steel or aluminum and quote the panels, posts, gates and fittings together so you can confirm how the fence will fit before your crew arrives on site.
3 Rail Flat Top Fence Specifications
Specifications
• Panel profile: three horizontal rails with a flat top
• Material: ornamental steel
• Nominal size: 4 ft high × 8 ft wide
• Rails: 16 ga, 1-3/16 × 1-5/64 × 1-3/16 in
• Pickets: 18 ga, 5/8 × 5/8 in
• Clear gap between pickets: 3-7/8 in
• Clear opening between post faces: 94-3/8 to 94-1/2 in
• Connections: one bracket per rail at each post
• Rackability: up to 52.5° on the reference panel
Powdercoating
• The reference steel panel has a powder-coated finish.
• Specify the color and site conditions, including coastal or deicing salt exposure, so we can review the coating and exposed fittings for your order.
Testing & Standards
• List the applicable standard and any required tests in your project specification.
• Confirm which test reports and supporting documents are available for the quoted panel, posts and connections before ordering.
Confirm What You're Buying Before Production
Review panel fit, finish and the included components before you approve a stock order or release a project for production.
Check Panel Width, Post Spacing and Gate Openings
The actual panel width and the post center-to-center spacing are different measurements. Mark the one your plan uses and include finished grade, installed height and gate openings. For a replacement or an extension, include a front view and a photo of the rail-to-post connection so we can check where the new section will meet the existing fence.
Specify the Material and Finish for the Site
For steel, review the galvanizing and powder-coat system on the quote. For aluminum, confirm the profile and finish along with the material of exposed brackets and fasteners. Flag coastal air, deicing salts or frequent irrigation at the inquiry stage. Include any required drawings or test documentation so we can confirm what is available for the proposed configuration.
Order Complete Fence Runs and Plan Reorders
Review one component list for panels, posts, brackets, gates and hardware. For distributor stock, include quantities by size and finish, plus carton labels or packing requirements. For a phased installation, mark which runs you need first. Keep the approved drawing and finish reference with your order so your team can identify the same configuration when reordering.
Where 3 Rail Flat Top Fencing Fits
The three-rail profile works along residential frontages, shared outdoor spaces and commercial entrances. Set the height and gate locations around the purpose of each fence run.
Factory-Direct Fencing from JZH Fence
JZH Fence manufactures steel and aluminum fencing and gate systems in Nanjing, China. We supply wholesalers, distributors and contractors serving North America and Australia. Send your stock list or project drawings so we can review the panels, gates, posts and fittings as one order.

What Trade Buyers Say About Working with JZH Fence
Three buyers describe how they planned stock, managed design changes and coordinated deliveries with JZH Fence.
How to Order Your 3 Rail Flat Top Fence
Start with a stock list, site plan or a panel you need to match. We'll use it to confirm the specification, the parts included and the delivery details with you.
01
02
03
Frequently asked questions
Send your required installed height, actual panel width or post spacing, and clear gap between pickets. For US and Canadian orders, you can use feet and inches. For Australian orders, you can use millimeters. We’ll confirm the available dimensions and post layout on your drawing and quote.
Start with the construction specified for the job, then consider handling, exposure and maintenance. Steel is a practical choice where the specification calls for steel sections. Aluminum generally weighs less in comparable panels. Ask us to confirm the finish and exposed fittings for the environment, especially on coastal or heavily salted sites.
A stepped layout keeps each panel level and changes the height at the posts. A raked layout follows the grade if the selected panel construction allows it. Send your site levels and desired ground clearance so we can check which layout is available and how it affects the posts and gates.
Send a straight-on photo, the actual panel width and height, picket gap, and the position of all three rails. Include a close-up of the post connection and a finish sample or reference if available. Show whether the pickets end at the bottom rail or extend below it. We’ll review whether we can match the profile and connection.
Both depend on the material, dimensions, finish and order quantity. Share your purchase list and required delivery date. Your quote will confirm the applicable minimum order quantity and estimated production and dispatch timing for the configuration you select.









